Print with thermal printer in the cold season

Thermal printers are the types of printers with carefully controlled heat generated by the pressure of the printhead. There are two types of thermal printers. thermal transfer and direct thermal. direct thermal printer as the name suggests, directly on the media. The media have a chemical coating, the color changes with the heat of the printhead. Thermal transfer printer with a ribbon that comes in contact with the printhead and the media. To create an image of the heat from thePrevalence is "transmitted" by the group dissolved the ink into the model produced by the printer. The band consists generally of a feed with plastic coating, ink on one side. Thermal transfer ribbons can be coated or lined inside out, used depending on the brand and model of your printer with the tape. The ink is typically made of a wax or plastic. wax ribbons are good for printing on uncoated paper. mixed resin ribbons are typically reserved for printing on syntheticMedia, which is very smooth. The higher the resin content, the more stain the print media. Since these two printer began to precise temperatures to create an image, print technologies have affected both conditions are very cold.

The printers have an advantage when it comes to printing in cold conditions. As the head makes contact with the media immediately, it can tolerate temperatures a little colder of direct thermal and thermal transfer printer.Direct thermal printers at temperatures in the low 40 degrees Fahrenheit to work. In contrast, thermal transfer printers have problems with the print quality in the mid-field temperature of 40 degrees Fahrenheit. The majority of thermal printers to provide a low temperature warning above. If temperatures are below freezing levels did not, the printer will start warming up the pressure on them. If temperatures are below freezing levels put a portable heater or heat lamp, the direction of the face arethermal printer. You do not want to put on a radiator near the printer or turn the heat up, because the metal parts would concentrate the heat and use more harm than good. A distance of 4 to 6 meters should be sufficient. In addition, a desired temperature within 50-60 degrees Fahrenheit would be good for cold days. What is better than hot enough too hot. If the printer is in an environment that uses chilled, a box may be retained or created foran environment for the printer separately cooled from the outside.

Cold Weather

If the print quality thermal printer is important for the cold, make sure the area is maintained in its normal operating temperature.

Print with thermal printer in the cold season